The incinerator to be completely assembled logic and wired function tested in the factory, before dispatch.
– One high flue gas temperature indicator/alarm to provide an audio/visual warning in case of high flue gas
temperatures occurring in two phases:-
First stage audible alarm, second stage incinerator shutdown, with a single voltage free contact for connection to a
remote alarm system.
– Flexible cable control linkages to deliver under fire air, overfire air and burner slide plate control to front of
incinerator.
– Special feeding door with automatic lock to safeguard the operator from accident.
2.2 main CHAMBER
connections for primary air supply, start-up burner, thermal reactor, water injection and all necessary measuring probe
sockets.
- The chamber shall consists of a welded steel shell of minimum 6mm thickness plate reinforcing strips and
refractory appropriate for a continuous service temperature of 1500 deg. C. This lining shall be separated from the steel
structure by a second layer of insulation. Heat resistant cast steel plates with many fine holes shall be lied over
the refractory lined floor of this unit with a space between the two.
- The entire chamber, including all the connections shall be lined with a composition of castable hot face
2.3 THERMAL REACTOR
- The chamber shall be externally primed and sprayed with a silicone enamel paint.
outlet, the secondary and tertiary air supply, the reactor burner and all the required measuring probes.
- The reactor shall consist of welded cylindrical steel sections of minimum 9.5mm thickness plate.
- The whole chamber shall internally be constructed with a refractory lining.
- The chamber shall be provided with connection for the low temperature carbonization gas intake, the flue gas
outlet, the secondary and tertiary air supply, the reactor burner and all the required measuring probes.
- Externally the reactor shall be primed and sprayed with a silicone enamel paint.